Compograss® Paradise Plus 40DB Artificial Grass (2x25m Roll - 50m²)

The brand Compograss presents an artificial grass created from stabilised polypropylene fabric that is resistant to UV rays, reinforced with a needle-felt layer. For installation the surface must be asphalt, concrete or compacted ground that is either draining (porous) or impermeable (with the corresponding fall for water run-off). The rolls are joined by gluing, with a two-component polyurethane adhesive, over a width of about 15 cm on the underside of each one, and fixed onto strips of non-woven polypropylene geotextile, using 350-450 g of adhesive per linear metre

Technical details: 

• Fibre composition: 100% polyethylene resistant to UV rays.
• Weave: Linear tufting
• Fibre structure: Dogbone monofilament (memory effect and extra soft) and textured fibre
• Primary backing: Stabilised polypropylene fabric that is resistant to UV rays, reinforced with a needle-felt layer.
• Total pile height: 42 mm
• Total weight: 2,713 g/m²
• Drainage system: 4 mm incisions every 10×10 cm
• Dimensional stability: ± 0.5%